Monday, March 17, 2014

Product Review: Arctic Chill Ice Ball Makers

ARCTIC CHILL ICE BALL MAKER

Our friend Rizzi at Arctic Chill has once again sent us some goodies for the purposes of releasing our sage-like wisdom to the public. This time we're focusing on their Ice Ball molds, which ...make balls of ice when you fill them with water and put them in the freezer.  

Let this be a lesson unto all labels, manufactures, or distillers:  Send us stuff and we'll make a post about it here.


Unlike the Arctic Chill Muddler, these Ice Ball Makers are soft things that go in the freezer.  But like the Arctic Chill Muddler, the Arctic Chill Ice Ball Makers are available on Amazon.com and you can follow this link to the purchasing page.  Additionally, you can see them at the Arctic Chill’s own website here.

Let’s take a look at this invention shall we?



 photo ICE001_zps85656e09.jpg


Again, these are from Arctic Chill, makers of bar-ware and other cocktail accessories. 


 photo ICE002_zps0a078928.jpg


Behold the science:  The less surface area you have, the slower ice will melt in anything.  This means less of that water ends up turning your finely aged spirits into flat failures as you continue your libation.



 photo ICE003_zps9fd1c917.jpg



 photo ICE004_zpse5ff5dcc.jpg


Yes, these photo shoots take time and usually have hot lights, and so to keep ice from melting, which would prevent accurate measuring, we have gone outside in the Arctic Vortex to make sure that everything stays in a solid state.


 photo ICE005_zps9da26516.jpg


As you can see we have added some food coloring to our ice.  This is just so that it photographs better and the difference will be as apparent and easy to spot as possible.

These measurements were made on a digital scale but rounded a bit just to make things easy.  While we will forever hate the metric system, its ease of use is not lost on us here on Pinky Mixology, and so we'll be including it here.



 photo ICE006_zps2359630c.jpg



 photo ICE007_zps59f7a02e.jpg


This glass holds 9 ounces when filled to the top.  No normal human being usually fills a martini glass until the only thing keeping in the liquid is surface tension, but we're doing science here.  No matter what the shape of your vessel, the Arctic Chill Ice Ball will always displace the same amount, so there's no reason to check it in other glasses, but what changes is the percentage of displacement.  When 4 ounces is 50% of what's in there, that's a big deal, but when it's 10%, not so much.



 photo ICE008_zps7fd69102.jpg



You may notice that our water/booze has turned the color of the dyed ice rather dramatically.  This is because the ice is put into the glass first and then has the liquid poured into it, in order to perform accurate measuring.  Also, this is how just about every drink out there is made (no one puts ice in a drink after it's all mixed), so it's a good way to gauge the early melt which happens when you pour stuff over ice.  The darker the water, the larger the amount of initial melt.



 photo ICE009_zpsffe2d706.jpg



While the Arctic Chill Ice Ball doesn't share many flaws with things like Whiskey Stones or those metal drink chillers, in the standard bar tumbler/pint glass it will roll down and smack you in the teeth as you finish the end of your drink.  With normal ice cubes that's annoying enough, but let's remember that this thing starts off weighing about 4 to 5 times as much as a normal ice cube.



 photo ICE010_zps655b21fb.jpg


It is unfortunate that the Arctic Chill Ice Ball set doesn't come with a mold to make some relatively smaller spheres so as to be able to stack into a highball glass.  From The Gin & Tonic to the Bloody Mary, and every Long Island Iced Tea in between, highball glasses are almost always accompanied with ice in anything they contain.  Not being able to get this into one does take away an area of functionality which would have added considerable value to the over all product.


 photo ICE011_zps62c0253c.jpg


All comparisons between ice shapes are done by weight and are within less than 1/4 ounce of dead on.  Obviously we aren't going to be sawing an ice cube in half or something so we get as close as we can.


 photo ICE012_zpsb96d9471.jpg


Now that really is ridiculous.  If you were at a bar and they shoved that much ice in a glass of anything you'd be calling shenanigans before they even put the coaster down.  The Arctic Chill Ice Ball does indeed give your drink the cooling power of all that ice, but without taking up so much space or releasing so much water into the mix.


 photo ICE013_zpsf253662f.jpg


Now for the melt time of the Arctic Chill Ice Ball.
We kept this glass inside a room at 70F (yes we had a thermometer going) and the internal temp stayed at 43F.


 photo ICE014a_zpse4966d9e.jpg



 photo ICE015_zpsd99b858d.jpg


We're not going to plot this curve out (you math people can do that on your own if you feel like) but it doesn't take a rocket scientist to realize that after the initial melting caused by the pouring of liquid over the Ice Ball, the rate of melt (aka the loss of mass) is extremely slow.  In the same environment with the same amount of water, our green cubes were close to toast.  Our red and blue cubes were still about 45-40% there but we had much less of our base beverage in there.  All temps were holding at 43-45F with the Arctic Chill Ice Ball being the coldest.



 photo ICE016_zpsdb311a0b.jpg

Yup, that's a huge 130 minutes that the Arctic Chill Ice Ball held out in a 70F room before melting away.  The temp of the drink remained 43F throughout that time.  Even our big GE ice cubes were toast just after one hour.  2 hours and 10 minutes is much longer than a drink should sit before being finished, and so any issues you may have of the entire ball melting and adding all that water to your drink should not be a concern unless you have an advanced nursing degree.


 photo ICE017_zps24f0d209.jpg


They are nifty, but they're not perfect.  Here are some of the issues we encountered.



 photo ICE018_zps2f4ec46d.jpg


By far, expansion is the biggest issue we faced.  When filled to the top, the ice will expand, pushing out quite a bit and even seperating the 2 halves, causing an unsightly ring round the center of the Ice Ball (Imagine a reverse Death Star with a ridge, not a trench, across the middle and a lumpy nipple where the indent for the laser should be). 

Like with the Arctic Chill Muddler, addressing the biggest problem with the Ice Balls is very easy.  Being flexible silicone, you can just squeeze out a few drops of water after filling it all the way up and this kind of thing won't happen.  We filled these all the way up just to show you that this is a possible thing that can happen if you don't take appropriate measures.



 photo ICE020_zps98c91d55.jpg

The Mpemba effect (yes that's a thing), is the phenomenon of hot water freezing faster than chilled water.  Science still can't figure out exactly what that happens, but when it does happen, it means that the ice from hot water freezes more clearly and transparently, while cold water tends to produce that opaque white we are all familiar with.  Being silicone, these Ice Ball makers do insulate their interiors enough to mitigate this, so you will A) wait longer than standard ice cubes for these to be ready to go, and B) you will most likely get opaque ice balls out of this.  


One non-issue was that, just out of the box, these have a strong plastic / new-product smell to them.  After a quick initial wash in soap and water removed the smell, our ice never picked up that smell at all.



 photo ICE021_zps5618be7f.jpg



 photo ICE022_zps35351db3.jpg

Ok we just wanted to see what would happen if we put jello in there.  Maybe something like Flan or frozen yogurt would be nice in there too.  Oddly enough, when we froze one of the jello filled balls, it turned into an amazing soft ice fruit treat.  Although it wouldn't come out of the mold in once piece, we chomped it down and it was really good.  If you've ever had Kakigori or Grattachecca before, it's almost the same thing.  Perfect for hot days.

 photo ICE023_zpsd3b9ba28.jpg



 photo ICE024_zps515713fe.jpg


To recap, the Arctic Chill Ice Balls do exactly what they say they do.  They kept our drinks colder, much longer, all the while taking up less space and allowing for more hooch.  They look cool, and they are not hard to keep clean.  Although there are only 4 in the box, you can create an army of these Ice Balls just by making them before you need them and stashing them away in a container or zip-top bag in your freezer. 

If you only have straight spirits on the rocks at airport lounges (or straight from a plastic bottle in the park), then these might not be the one thing you're really needing, but these are a great must-have/should-have if you do any of the following: 


Entertain
; How cool is it gonna be when you bring out that Pimm's Cup or pour the Sangria with  round ice balls in there, and all your friends think you're so amazing.


Smoke Cigars
;  Enjoying a cigar is a slow process and so your Scotch needs to keep an accompanying pace, which is where that very slow melting process becomes valuable.
 

Play Cards;  If you play poker, you have certainly been in the situation where you got really into one long or intense hand, and then you look back at your Walker Green or Makers 46 and realize that you drowned the thing.  That won't happen with this.  

Finally, we should mention that The Arctic Chill Ice Ball is perfect for (metal, not glass) cocktail shakers.  It gets things hella cold, but is big enough so that it's super-easy to prevent it slipping out when pouring from the split (try that with those little ice-machine ice cubes).

One thing we would like to see, is for one of the Ice Ball molds to look the same on the outside, but have the inside divided into smaller chambers so that 2-3 smaller ice balls can be made for use in highball glasses. Or maybe offer an insert that makes variable sizes.


The Arctic Chill Ice Ball Maker is available from Amazon.com. You know you want it.

To find out about other Arctic Chill products, check out our review of the AC Muddler.
 

Arctic Chill's own website is here.



3 comments:

  1. Ice makers happen to be an incredible option for making ice for various parties and occasions. Refer to web to find latest info about ice cube makers.

    ReplyDelete
  2. Ice cube makers are indispensable for making the huge amount of ice for the occasions. It is paramount at the same time to purchase ice cube makers for making ice of prerequisite amount.

    ReplyDelete